Bridge drainage
Discover our innovative MEAKERB BRIDGE solutions, our monolithic 2 in 1 Kerb and drainage channel solution made of polymer concrete, specifically designed for bridge drainage.
Effective, economical and sustainable bridge drainage: When it comes to new bridge construction and bridge renovation, drainage planning plays a key role in the durability, safety and environmental friendliness of the structure.
- One-piece drainage channels without moving individual components and covers
- 0.5 m length of the individual elements: Quick installation, easy realization of bridge twists and curves
- Continuous MEA EPDM sealing lips: Significant reduction of movement-crack formation
How can we help you?
Our dossier contains all the relevant and technical data, drawings and installation instructions for planning the drainage of bridges in accordance with BAST and ZTV-ING. You are welcome to send us project-related enquiries directly using a project enquiry. We will get back to you as soon as possible.
Advantages
Linear drainage
over point drainage
- Thanks to the higher hydraulic capacity compared to point drainage, the number of water outlets downwards can be reduced, enabling longer sections.
- Fewer penetrations due to drains increase the safety and durability of the construction, as the sealing and supporting structure are under less strain.
- No formwork required on the road surface side when the cap is poured or rebuilt.
- Existing drain openings can continue to be used for renovations.
- More effective drainage of porous asphalt (OPA) due to shorter water channels.
- Integrates curb and drainage into one system.
- No driving over drains, thus avoiding defective drains in the traffic area.
- No longitudinal slope necessary in the road surface or edge area.
- Wider sidewalks possible, since the cap is widened.
- Alternatively, wider lanes are possible because the drainage is integrated into the cap.
- The water is drained in the cap so that it does not remain on the road.
- Prevention of aquaplaning and ice formation on the road.
- The hollow channel makes the cap lighter, which results in a weight and construction cost savings.
MEA
products
For professional bridge drainage.
MEAKERB Bridge 160
in detail
2 in 1 Kerb channel for linear bridge drainage, also as OPA version, incl. expansion joint and inspection elements and accessories.
Bridge160
MEAKERB Bridge 200
in detail
Hollow board channel for linear bridge drainage, for installation in the bridge cap, also as OPA version, incl. expansion joint and inspection elements and accessories
Bridge200
BIM Files
Contact form
Please request the BIM files using the following form:
BIM-Files
07
Advantages of
MEAKERB Bridge
01
Sealed Thanks to the MEA sealing lip
- Kerbstone with integrated drainage solution and continuous MEA sealing lip
- Hollow edge channels for linear bridge drainage in accordance with the guidelines of the BAST and ZTV-ING
- Loading class D 400 ** according to DIN EN 1433
- With matching accessories: inspection elements, glass fiber-reinforced polymer reinforcement bars, front plates and other drainage components
02
Made of high-quality polymer concrete
- Salt, chemicals and oil resistant
- Optimized inlet openings for the rapid drainage of rain water
- Also available as an OPA variant
- Traffic-situation-dependent variants in accordance with BAST (KAP 12)
- Non-urban areas V> 50 km/h: MEAKERB BRIDGE 200-75 (7.5 cm board height)
- Inner-city areas V< 50 km/h: MEAKERB BRIDGE 160 150 (15 cm board height)
03
Integrated outlet pipe
- Vertical pipe ø 160 as per ZTV ING Part 8 Section 5 2.1 (4)
- One-piece pipe – less installation effort
- Tightly molded
- Pre-assembled
- 100% leak-proof
- Stainless steel (No. 1.4571 according to DIN EN 10088 with a minimum wall thickness of 2 mm) according to ZTV ING Part 8 Section 5 2.3 (1)
- 9 cm socket length
04
EPDM seal
- Optimized shape of the sealing lip – prevents water from seeping into the structure
- No maintenance required like with a maintenance joint
- The flexible seals can better absorb bridge torsion
05
GRP anchor included
- The MEA GRP anchor rods are used to securely anchor the hollow curb gutter in the bridge cap
- Prepared for optional installation according to BAST (KAP 12 & DICHT20)
- GRP reinforcement bar (L= 40cm)
- Material optimally suited to prevent corrosion of the bridge reinforcement
- Material in accordance with ZTV ING Part 8 Section 5 2.3 (1)
- 4 x per meter & M14
- Quick installation using Resifix adhesive
- Adhesive behavior tested using pull-out tests (incl. certificate)
- Respect installation with the minimal concrete cover
06
Curve realization
- With a channel length of 500 mm and the integrated sealing lip, an optimal shaping of different curve radii can be realized
07
Complete system from a single source
- The complete MEA team is at your side to advise and support you in planning your projects
MEAKERB Bridge
For bridge constructions and renovations
The MEAKERB BRIDGE products are ideal for the construction and renovation of bridges.
MEA offers a perfectly coordinated complete range that optimally meets the requirements of planners. The polymer concrete used is characterized by its low weight and is therefore ideal for bridge construction. With the MEAKERB BRIDGE hollow board channel you combine bridge drainage, curb and formwork of the cap in a single product, which significantly speeds up installation. Thanks to the optimized channel cross-section, there is a high drainage performance
guaranteed. Our application technology also supports you with practical installation instructions and technical advice.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYour partner
for drainage solutions
The MEA GROUP
Let's talk about it!
Plan your next project together with our experts at MEA! We will be happy to advise and support you through to the end of the project. Our services include
- Comprehensive product advice to find the perfect solution for you
- Support with the implementation of drainage projects
- Help with technical questions and installation
- Provision of extensive 3D drawings (STP, BIM) for your success
How can we help you?
Our dossier contains all the relevant and technical data, drawings and installation instructions for planning the drainage of bridges in accordance with BAST and ZTV-ING. You are welcome to send us project-related enquiries directly using a project enquiry. We will get back to you as soon as possible.
